=========================

WiRES-X #21000 CQ-America

=========================

2015/07/25 19:55:21  *-*-* Call Start No.21000 *-*-*

2015/07/25 19:55:22  Connected to CQ-AMERICA(21000). 

2015/07/25 19:55:22  Room Member(13):W4VSP(11477),K7DRA(11322),KK4ONE(11247),W8WCL(11470),K1GGS(11117),KF2AX(11475),N8VTU(11213),

2015/07/25 19:55:22  KA9ZRZ(11437),VE7OVY(11478),KB5NFL(11456),KC3BRA(11353),KB3WBN(11095),KC0ITF(11360),

2015/07/25 19:55:32  WK-JL3YTN(15313) IN. 15 Nodes.

2015/07/25 19:55:37  W8KRF-NODE(11223) IN. 16 Nodes.

2015/07/25 19:56:26  W2GLD-NODE(11066) IN. 17 Nodes.

2015/07/25 19:57:06  KA6SUB-KEN(11124) IN. 18 Nodes.

2015/07/25 19:57:41  K8SRB-STAN(11328) IN. 19 Nodes.

2015/07/25 19:58:33  N4DLW-DAVE(11036) IN. 20 Nodes.

2015/07/25 20:01:54  N0AGI-NAGI(11191) IN. 21 Nodes.

2015/07/25 20:04:06  KC3BRA-RPT(11353) OUT. 20 Nodes.

2015/07/25 20:06:08  KC3BRA-RPT(11353) IN. 21 Nodes.

2015/07/25 20:06:27  KC3BRA-RPT(11353) OUT. 20 Nodes.

2015/07/25 20:09:27  KC3BRA-RPT(11353) IN. 21 Nodes.

2015/07/25 20:13:12  KC3BRA-RPT(11353) OUT. 20 Nodes.

2015/07/25 20:13:59  KC3BRA-RPT(11353) IN. 21 Nodes.

2015/07/25 20:16:27  KE7CAG-JW(11417) IN. 22 Nodes.

2015/07/25 20:19:56  WK-JL3YTN(15313) OUT. 21 Nodes.

2015/07/25 20:21:40  Connect Request From W4RFJ-ND (11494)

2015/07/25 20:27:11  N6TFL-ND(11134) IN. 22 Nodes.

2015/07/25 20:28:01  N6TFL-ND(11134) OUT. 21 Nodes.

2015/07/25 20:31:01  N0AGI-NAGI > CQ-AMERICA : is it just me or the audio coming in from W8KRF is really low. I'm also hearing some echo

2015/07/25 20:31:29  KC0ITF-ND > CQ-AMERICA : low here too

2015/07/25 20:31:45  WA8KIM-RPT > CQ-AMERICA : low here too

2015/07/25 20:32:40  KC3BRA-RPT(11353) OUT. 20 Nodes.

2015/07/25 20:32:56  N0AGI-NAGI > CQ-AMERICA : would it help if we all did a round-call and did quick audio check

2015/07/25 20:33:53  KF4HR-NC(11019) IN. 21 Nodes.

2015/07/25 20:38:20  N0AGI-NAGI > CQ-AMERICA : i still cant legibly hear K1GGS. i think his MIC gain, on his radio might need adjustment

2015/07/25 20:39:06  W2GLD-NODE > CQ-AMERICA : The baud rate is under Settings>HRI-200 Setup

2015/07/25 20:39:19  KC0ITF-ND > CQ-AMERICA : his audio was slightly better than W8KRF

2015/07/25 20:39:23  W2GLD-NODE > CQ-AMERICA : Proper Baud Rate for Digital users is 1200

2015/07/25 20:39:51  KC0ITF-ND > CQ-AMERICA : why is that the proper bit rate?

2015/07/25 20:39:57  KB3WBN-ND(11095) OUT. 20 Nodes.

2015/07/25 20:40:40  N0AGI-NAGI > CQ-AMERICA : someone asked about WIRES-X site url for firmware.  here it is: http://yaesu.com/jp/en/wires-x/index.php

2015/07/25 20:40:45  WA8KIM-RPT > CQ-AMERICA : K1GGS audio is only half volume to me. W2GLD & N0AGI audio were perfect. I'm in analog

2015/07/25 20:41:06  W2GLD-NODE > CQ-AMERICA : I've seen this documented in several places, I am looking through the documents now, but Yaesu's Tech Support will also confirm the following settings:

2015/07/25 20:41:13  W2GLD-NODE > CQ-AMERICA : SQL Active=High

2015/07/25 20:41:22  W2GLD-NODE > CQ-AMERICA : RXin Select=RX12

2015/07/25 20:41:38  W2GLD-NODE > CQ-AMERICA : RX12 Input=HIGH

2015/07/25 20:41:54  W2GLD-NODE > CQ-AMERICA : RX96 Input=HIGH

2015/07/25 20:42:04  W2GLD-NODE > CQ-AMERICA : PTT ACTIVE=Low

2015/07/25 20:42:16  W2GLD-NODE > CQ-AMERICA : TXout Gain=TX12

2015/07/25 20:42:16  N0AGI-NAGI > CQ-AMERICA : WA8KIM's, W2GLD and a most of the other speakers came in perfect w/ their audio.  K1GGS is quite low

2015/07/25 20:42:29  W2GLD-NODE > CQ-AMERICA : All check boxes to the right are off for digital users

2015/07/25 20:42:57  W2GLD-NODE > CQ-AMERICA : We all can test these settings after the net if you'd like

2015/07/25 20:43:00  WK-JL3YTN(15313) IN. 21 Nodes.

2015/07/25 20:43:28  W2GLD-NODE > CQ-AMERICA : WA8KIM you are cutting in and out

2015/07/25 20:43:46  KG5EIU(11391) IN. 22 Nodes.

2015/07/25 20:44:12  VE7OVY-ND(11478) OUT. 21 Nodes.

2015/07/25 20:44:20  VE7OVY-ND(11478) IN. 22 Nodes.

2015/07/25 20:44:31  KA6SUB-KEN(11124) OUT. 21 Nodes.

2015/07/25 20:45:56  KA6SUB-KEN(11124) IN. 22 Nodes.

2015/07/25 20:47:20  WA8KIM-RPT > CQ-AMERICA : W2GLD Thanks. I just confirmed that it's my internet.

2015/07/25 20:48:19  W2GLD-NODE > CQ-AMERICA : Okay cool, yeah you were cutting in and out pretty bad during those last transmissions.

2015/07/25 20:48:38  W2GLD-NODE > CQ-AMERICA : Which version of EchoLink are you using?

2015/07/25 20:48:47  W2GLD-NODE > CQ-AMERICA : Windows, AllStar, SVX

2015/07/25 20:49:17  W8WCL-BILL(11470) OUT. 21 Nodes.

2015/07/25 20:49:21  N3GSD-ND(11481) IN. 22 Nodes.

2015/07/25 20:49:28  W4RFJ-ND(11494) IN. 23 Nodes.

2015/07/25 20:49:29  WA8KIM-RPT > CQ-AMERICA : I adjusted my audio levels using a Marconi Full Duplex signal generator/spectrum analyzer, yet the difference in audio from digital to analog is drastic.

2015/07/25 20:50:05  W2GLD-NODE > CQ-AMERICA : Yeah, all analog to digital is pretty tough, plus all the analog users have varying levels which doesn't help.

2015/07/25 20:50:22  KA6SUB-KEN(11124) OUT. 22 Nodes.

2015/07/25 20:50:44  W2GLD-NODE > CQ-AMERICA : To do it right, the EchoLink node needs an ALC circuit to levelize the audio coming in from all the analog users, then you can balance that with the service monitor.

2015/07/25 20:50:55  WK-JL3YTN(15313) OUT. 21 Nodes.

2015/07/25 20:51:16  KA6SUB-KEN(11124) IN. 22 Nodes.

2015/07/25 20:51:52  WA8KIM-RPT > CQ-AMERICA : I tried using software ALC (on EchoLink but it was too slow :( I nned to invest into a hardware ALC I suppose.

2015/07/25 20:52:28  ---- WIRES-X End ---

2015/07/25 20:52:33  ----WIRES-X Start---

2015/07/25 20:52:40  Transceiver Mode:Analog 

2015/07/25 20:52:41  Number of sound devices = 6

2015/07/25 20:52:41  Set Voice Mixer Device : Input=4 Output=1

2015/07/25 20:52:41    Mixer input device=WIRES-X Audio In (3- HRI-200 A(CH1) USB Audio codec            

2015/07/25 20:52:41    Mixer output device=WIRES-X Audio Out (3- HRI-200 A(CH1) USB Audio codec             

2015/07/25 20:52:41  HRI-200 Audio device detected.

2015/07/25 20:52:50  *-*-* Call Start No.21000 *-*-*

2015/07/25 20:52:50  Connected to CQ-AMERICA(21000). 

2015/07/25 20:52:50  Room Member(21):W4VSP(11477),K7DRA(11322),KK4ONE(11247),W4RFJ(11494),K1GGS(11117),KF2AX(11475),N8VTU(11213),

2015/07/25 20:52:50  KA9ZRZ(11437),KG5EIU(11391),KB5NFL(11456),N0AGI(11191),KF4HR(11019),KC0ITF(11360),KA6SUB(11124),KE7CAG(11417),

2015/07/25 20:52:50  W8KRF(11223),W2GLD(11066),VE7OVY(11478),K8SRB(11328),N4DLW(11036),N3GSD(11481),

2015/07/25 20:54:54  KB5NFL-ND(11456) OUT. 21 Nodes.

2015/07/25 20:55:22  KG5EIU > CQ-AMERICA : W4RFJ - what radio are you using ?

2015/07/25 20:55:28  W8KRF-NODE(11223) OUT. 20 Nodes.

2015/07/25 20:55:41  N0AGI-NAGI > CQ-AMERICA : i need to drop off.

2015/07/25 20:55:42  WA8KIM-RPT > CQ-AMERICA : Interesting. W4RFJ's audio is perfect. W2GLD's audio is glitching. I rebooted my WiRES-X and no difference. Oh well!  :)

2015/07/25 20:55:52  WA8KIM-RPT > CQ-AMERICA : See ya Nagi

2015/07/25 20:56:02  KG5EIU > CQ-AMERICA : I don't hear the "glitch" in W2GLD

2015/07/25 20:56:14  KF4HR-NC > CQ-AMERICA : Is anyone hearing an echo on W2GLD?

2015/07/25 20:56:30  KG5EIU > CQ-AMERICA : it is impressive audio from W4RFJ....

2015/07/25 20:56:33  N0AGI-NAGI(11191) OUT. 19 Nodes.

2015/07/25 20:56:34  WA8KIM-RPT > CQ-AMERICA : I am hearing the echo on W2GLD, but other's aren't  Weird.

2015/07/25 20:56:59  KG5EIU > CQ-AMERICA : may be your iNet connection...

2015/07/25 20:57:17  W8KRF-NODE(11223) IN. 20 Nodes.

2015/07/25 20:57:19  KF4HR-NC > CQ-AMERICA : W4RFJ sounds fine, but I'm hearing an echo on W2GLD.

2015/07/25 20:57:20  N3GSD-ND(11481) OUT. 19 Nodes.

2015/07/25 20:57:32  WA8KIM-RPT > CQ-AMERICA : KF4HR ditto here

2015/07/25 20:58:11  Disconnect menu clicked..

2015/07/25 20:58:11  * Disconnected *

2015/07/25 20:58:23  *-*-* Call Start No.21149 *-*-*

2015/07/25 20:58:24  Connected to WA8KIM-RPTR-ROOM(21149). 

2015/07/25 20:58:24  Room Member(0):None.

2015/07/25 20:58:40  *-*-* Call Start No.21000 *-*-*

2015/07/25 20:58:40  Connected to CQ-AMERICA(21000). 

2015/07/25 20:58:41  Room Member(18):W4VSP(11477),K7DRA(11322),KK4ONE(11247),W4RFJ(11494),K1GGS(11117),KF2AX(11475),N8VTU(11213),

2015/07/25 20:58:41  KA9ZRZ(11437),KG5EIU(11391),K8SRB(11328),N4DLW(11036),KF4HR(11019),KC0ITF(11360),KA6SUB(11124),KE7CAG(11417),

2015/07/25 20:58:41  W8KRF(11223),W2GLD(11066),VE7OVY(11478),

2015/07/25 20:58:41  W4RFJ-ND(11494) OUT. 18 Nodes.

2015/07/25 20:59:08  N3GSD-ND(11481) IN. 19 Nodes.

2015/07/25 20:59:34  W4RFJ-ND(11494) IN. 20 Nodes.

2015/07/25 21:00:24  W4RFJ-ND > CQ-AMERICA : i am back!!

2015/07/25 21:00:33  KF2AX-ND(11475) OUT. 19 Nodes.

2015/07/25 21:01:00  N3GSD-ND > CQ-AMERICA : Roger, maybe you check your software ver.

2015/07/25 21:01:18  KF4HR-NC > CQ-AMERICA : Does anyone know if it's absolutely necessary to put the 400 in the HRI-200 mode (hold two red buttons on start up) when using the analog mode?

2015/07/25 21:01:32  W4RFJ-ND(11494) OUT. 18 Nodes.

2015/07/25 21:01:33  WB6PFJ-JIM(11196) IN. 19 Nodes.

2015/07/25 21:01:44  WA8KIM-RPT > CQ-AMERICA : In analog mode, no you don't have to put the 400 in HRI-200 mode.

2015/07/25 21:02:06  WA8KIM-RPT > CQ-AMERICA : But you have to set all the frequencies and CTCSS settings manually

2015/07/25 21:02:13  KG5EIU > CQ-AMERICA : anybody look at  WIRES Level Adjustment Software  ( 234.50 KB ) 

2015/07/25 21:02:34  KG5EIU > CQ-AMERICA : from http://www.yaesu.com/indexvs.cfm?cmd=displayproducts&prodcatid=108&encprodid=bc1bb347f2a945f01d8663807861aaae&divisionid=65&isarchived=0

2015/07/25 21:03:27  KF4HR-NC > CQ-AMERICA : Tnx Bill. I notice if I don't start up in the HRI-200 mode, when people unkey in a room, my callsign shows green for a second, and I've had a complaint about this.

2015/07/25 21:03:58  WA8KIM-RPT > CQ-AMERICA : I haven't tried the WiRES 2 audio level progra,.. looks interesting!

2015/07/25 21:04:28  KG5EIU(11391) OUT. 18 Nodes.

2015/07/25 21:05:21  N3GSD-ND(11481) OUT. 17 Nodes.

2015/07/25 21:05:56  KA6SUB-KEN(11124) OUT. 16 Nodes.

2015/07/25 21:06:02  KG5EIU(11391) IN. 17 Nodes.

2015/07/25 21:07:35  KG5EIU > CQ-AMERICA : mine is working on Windows 10 now

2015/07/25 21:08:50  W4RFJ-ND(11494) IN. 18 Nodes.

2015/07/25 21:08:50  W2GLD-NODE > CQ-AMERICA : In compatibility mode?

2015/07/25 21:09:43  VE7OVY-ND(11478) OUT. 17 Nodes.

2015/07/25 21:12:32  KC0ITF-ND > CQ-AMERICA : what data rate should be on the dr1x?

2015/07/25 21:12:58  W2GLD-NODE > CQ-AMERICA : 1200

2015/07/25 21:15:29  W4RFJ-ND(11494) OUT. 16 Nodes.

2015/07/25 21:15:41  KC0ITF-ND > CQ-AMERICA : where would one use 96k at?

2015/07/25 21:22:58  KC0ITF-ND > CQ-AMERICA : why have a 9.6k option?

2015/07/25 21:23:05  W2GLD-NODE > CQ-AMERICA : Hey Russ, intersted in testing your audio?

2015/07/25 21:25:24  K1GGS-RUST > CQ-AMERICA : Sorry was out feeding my face.  You still interested in testing?

2015/07/25 21:27:06  KA6SUB-KEN(11124) IN. 17 Nodes.

2015/07/25 21:27:57  KD6IOW-BOB(11047) IN. 18 Nodes.

2015/07/25 21:33:13  W2GLD-NODE > CQ-AMERICA : Mike, it's on it's way via e-mail...

2015/07/25 21:34:13  W2GLD-NODE > CQ-AMERICA : What???  What??? What???

2015/07/25 21:34:30  KG5EIU > CQ-AMERICA : no echo hear

2015/07/25 21:34:41  KG5EIU > CQ-AMERICA : errrr here... 

2015/07/25 21:34:58  K1GGS-RUST(11117) OUT. 17 Nodes.

2015/07/25 21:35:29  WK-JL3YTN(15313) IN. 18 Nodes.

2015/07/25 21:36:02  KD6IOW-BOB(11047) OUT. 17 Nodes.

2015/07/25 21:36:37  KD6IOW-BOB(11047) IN. 18 Nodes.

2015/07/25 21:37:34  KD6IOW-BOB(11047) OUT. 17 Nodes.

2015/07/25 21:39:41  W2GLD-NODE > CQ-AMERICA : Excellent

2015/07/25 21:39:53  W2GLD-NODE > CQ-AMERICA : Echo... Echo... Echo...

2015/07/25 21:40:02  KG5EIU > CQ-AMERICA : good audio on ka6sub

2015/07/25 21:40:13  W2GLD-NODE > CQ-AMERICA : Indeed

2015/07/25 21:40:43  W2GLD-NODE > CQ-AMERICA : Nice audio KA6SUB, good deal and glad we could help a fellow ham, pass it on...

2015/07/25 21:40:50  W2GLD-NODE(11066) OUT. 16 Nodes.

2015/07/25 21:42:20  W2GLD-NODE(11066) IN. 17 Nodes.

2015/07/25 21:43:13  KA6SUB-KEN(11124) OUT. 16 Nodes.

2015/07/25 21:50:27  TG9AFX-ND(11411) IN. 17 Nodes.

2015/07/25 21:51:25  KG5EIU(11391) OUT. 16 Nodes.

2015/07/25 21:51:52  KA9ZRZ-FL(11437) OUT. 15 Nodes.

2015/07/25 21:51:55  KG5EIU(11391) IN. 16 Nodes.

2015/07/25 21:52:17  W8KRF-NODE(11223) OUT. 15 Nodes.

2015/07/25 21:52:47  KG5EIU(11391) OUT. 14 Nodes.

2015/07/25 21:54:42  KC0ITF-ND(11360) OUT. 13 Nodes.



===============================

FROM THE WA8KIM-R ECHOLINK NODE

===============================

2015-07-25 19:47:33 Connect W2GLD-R Gerald L. Dubzak, Jr. 636674 24.247.31.32

2015-07-25 19:50:04 Verifying WB4LNM         John 75.232.100.180

2015-07-25 19:50:05 Verifying WB4LNM         John 75.232.100.180

2015-07-25 19:50:10 Connect WB4LNM         John - 75.232.100.180

2015-07-25 19:55:06 Connect AK4PY-L 709955 74.246.137.244

2015-07-25 19:55:58 Verifying VA3XJL         John 107.23.109.134

2015-07-25 19:55:59 Connect VA3XJL         John 407426 107.23.109.134

2015-07-25 20:00:44 Disconnect WB4LNM Peer requested disconnect

2015-07-25 20:25:06 Disconnect AK4PY-L Peer requested disconnect

2015-07-25 20:47:33 Disconnect W2GLD-R Peer requested disconnect

2015-07-25 20:47:40 Disconnect VA3XJL Peer requested disconnect



===========================

BROADCASTIFY.COM STATISTICS

===========================

Number Of Listeners: 3